Writeups - Reworked Exhaust
Since
I bought the Bronco I always had low power at the high end and suspected
it was the catalectic converter
I
recently ordered a Bassani Y-Pipe with a high flow cat. When they
arrived I started pulling apart my old exhaust and opened up the cat to
see what was inside. My suspicions were right.
Here
is the Mandrel Bent
Y-Pipe with cats. I also bought a mandrel U bend from Jegs. I cut it in
half to make two 90's. Add to that a 2' extension with one end expanded
to rework my muffler.
I
installed the Y-Pie and cat. The Oxygen sensor fit right in place.
It's
a good fit.
The
Flowmaster Super 40 was 2 1/4" in / out so I used a piece of 3" exhaust
pipe and cut the opening to fit.
Thu U
bend makes to nice 90's.
And out the side it goes.
Ta-Da!
|